Quasi-synchronous thermocompensation for ISFET-based ionometric devices. Part 1: Theory and simulation
Abstract
Solid-state ion selective transducers, as an alternative to the traditional liquid electrolyte-filled glass electrodes, are known for over four decades now, and find their use in various areas of industry and applied science, such as in vivo analysis of the ions activity in biological and medical research, monitoring of toxic and aggressive environments, and biosensors design. However, along with potential advantages — short response time, small size, chemical inertness and durability — solid-state devices also possess certain inherent drawbacks — namely intrinsic noise, drift and instability of sensing properties, and cross-sensitivity to various interfering environmental conditions — that inhibit their widespread acceptance. Further improvement of the fabrication technology and methodology of application of these devices is thus still an important practical task even today.
This paper is a first part of the two-part work dedicated to the problem of compensating the temperature dependence of a solid-state ion selective transducer output. Specifically, presented work considers the possibility of using ion-selective field-effect transistors (ISFET) that serve as primary transducers in an ionometric device, as temperature sensors. This allows compensating the temperature dependence of ionometric signal without substantial complication of the ionometer structure, and eliminates the need to include a separate thermometric channel as part of the instrument. Ionometric and thermometric channels are combined into a unified measuring path, with the sensor functions separated in time.
The ISFET operation modes are switched by changing polarity of the bias voltage, and thus direction of the current flowing through the sensor. The authors propose a corresponding secondary transducer structure and simplified schematic illustrating the implementation of its key components. The concept’s applicability is supported by the circuit simulation results. Some aspects of the practical implementation of the proposed concept will be presented further in the upcoming second part of the paper.
References
Bergveld P. Thirty years of ISFETOLOGY. Sensors and Actuators B, 2003, vol. 88, iss. 1, pp. 1–20. https://doi.org/10.1016/S0925-4005(02)00301-5
Sandifer J., Voycheck J. A review of biosensor and industrial applications of pH-ISFETs and an evaluation of honeywell’s “DuraFET”. Mikrochimica Acta, 1999, vol. 131, pp. 91–98. https://doi.org/10.1007/PL00021393
Jimenez-Jorquera C., Orozco J., Baldi A. ISFET Based Microsensors for environmental monitoring. Sensors, 2010, vol. 10, iss. 1, pp. 61–83. https://doi.org/10.3390/s100100061
Dzyadevych S., Soldatkin A., El’skaya A. et al. Enzyme biosensors based on ion-selective field-effect transistors. Analytica Chimica Acta, 2006, vol. 568, iss. 1-2, pp. 248–258. https://doi.org/10.1016/j.aca.2005.11.057
Lee C.-S., Kim S. K., Kim M. Ion-sensitive field-effect transistor for biological sensing. Sensors, 2009, vol. 9, iss. 9, pp. 7111–7131. https://doi.org/10.3390/s90907111
Palan B., Santos F. V., Courtois B., Husak M. Fundamental noise limits of ISFET-based microsystems. Proceedings of the 13th European Conference on Solid-State Transducers, Hague, Netherlands, 1999, pp. 169–172.
Chauvet F., Amari A., Martinez A. Stability of silicon nitride/silicon dioxide/silicon electrodes used in pH microelectronic sensors. Sensors and Actuators, 1984, vol. 6, iss. 4, pp. 255–267. https://doi.org/10.1016/0250-6874(84)85021-0
Pavluchenko A. S., Kukla A. L., Goltvianskyi Yu. V. et al. Investigation of stability of the pH-sensitive field-effect transistor characteristics. Sensor Letters, 2011, vol. 9, no. 6, pp 2392–2396. https://doi.org/10.1166/sl.2011.1797
Lozovoy S., Kukla A., Pavluchenko A. Investigation of metrological performance of the ISFET-based pH sensors. Sensors & Transducers, 2014, vol. 27, pp. 225–232.
Khanna V. K. Remedial and adaptive solutions of ISFET non-ideal behaviour. Sensor Review, 2013, vol. 33, no. 3, pp. 228–237.
Bagotskiy S. V. Osnovy elektrokhimii [Fundamentals of Electrochemistry]. Moscow, Khimiya, 1988, 400 p. (Rus)
Van Hal R. E. G., Eijkel J. C. T., Bergveld P. A novel description of ISFET sensitivity with the buffer capacity and double-layer capacitance as key parameters. Sensors and Actuators B, 1995, vol. 24–25, pp. 201–205. https://doi.org/10.1016/0925-4005(95)85043-0
Jung-Lung Chiang, Jung-Chuan Chou, Ying-Chung Chen. Study of the pH-ISFET and EnFET for biosensor applications. Journal of Medical and Biological Engineering, 2001, vol. 21, no. 3, pp. 135–146.
Manjakkal L., Szwagierczak D., Dahiya R. Metal oxides based electrochemical pH sensors: Current progress and future perspectives. Progress in Materials Science, 2020, vol. 109, 100635. https://doi.org/10.1016/j.pmatsci.2019.100635
Gaddour A., Dghais W., Hamdi B., Ben Ali M. Temperature compensation circuit for ISFET sensor. Journal of Low Power Electronics and Applications, 2020, vol. 10,iss. 1, 2. https://doi.org/10.3390/jlpea10010002
Muzamil Eltejani Mohammd Ali, Omer Abdel Razag Sharif. Temperature compensation in pH meter – A Survey. SUST Journal of Engineering and Computer Science, 2015, vol. 16, no. 2, pp. 6–14.
Pavluchenko A. S., Kukla A. L., Goltvyanskiy Yu. V. Application of ion-selective field-effect transistors for enzyme assay of toxic admixtures in aqueous solutions. Tekhnologiya i Konstruirovanie v Elektronnoi Apparature, 2010, no. 3, рр. 35–46. (Rus)
Chin Y.-L., Chou J.-C., Sun T.-P. et al. A novel pH sensitive ISFET with on chip temperature sensing using CMOS standard process. Sensors and Actuators B, 2001, vol. 76, pp. 582–593.
Chung W.-Y., Lin Y.-T., Pijanowska D. G. et al. New ISFET interface circuit design with temperature compensation. Microelectronics Journal, 2006, vol. 37, no. 10, pp. 1105–1114. https://doi.org/10.1016/j.mejo.2006.05.001
Shalmany S. H., Merz M., Fekri A. et al. A 7 µW offset- and temperature-compensated pH-to-digital converter. Journal of Sensors, 2017, 6158689. https://doi.org/10.1155/2017/6158689
Morgenshtein A., Sudakov-Boreysha L., Dinnar U. et al. Wheatstone-Bridge readout interface for ISFET/REFET applications. Sensors and Actuators B, 2004, vol. 98, iss. 1, pp. 18–27. https://doi.org/10.1016/j.snb.2003.07.017
Chung W.-Y., Yang C.-H., Pijanowska D. G. et al. ISFET performance enhancement by using the improved circuit techniques. Sensors and Actuators B, 2006, vol. 113, iss. 1, pp. 555–562. https://doi.org/10.1016/j.snb.2005.06.018
Chen D. Y., Chan P. K. An intelligent ISFET sensory system with temperature and drift compensation for long-term monitoring. IEEE Sensors Journal, 2008, vol. 8, iss. 12, pp. 1948–1959. https://doi.org/10.1109/JSEN.2008.2006471
Gion H., Kubota K., Nakamura M., Yano M. Method and Device for Compensating Temperature-Dependent Characteristic Changes in Ion-Sensitive FET Transducer. Pat. EP0129852 (A2), 1985.
Rosado L. Electronica Física y Microelectrónica. Madrid (Espana), Paraninfo, 1987, 502 p.
http://www.spectrum-soft.com/ (Date of access: 10.03.2021)
Copyright (c) 2021 Pavluchenko O. S., Kukla О. L.
This work is licensed under a Creative Commons Attribution 4.0 International License.
