Loop heat pipes with an aluminum evaporator for combined radio-electronic equipment cooling systems

  • Yu. E. Nikolaenko NTUU «Kiev politechnic university», Ukraine
  • B. M. Rassamakin NTUU «Kiev politechnic university», Ukraine
  • S. M. Khairnasov NTUU «Kiev politechnic university», Ukraine
Keywords: loop heat pipes (LHPs), aluminum evaporator, radio-electronic equipment cooling, acetone, ammonia, performance characteristics, mobile equipment

Abstract

Results of an experimental study on the performance characteristics of loop heat pipes (LHPs) with acetone and ammonia are presented. The LHP casing was made of stainless steel and aluminum. The evaporator chamber was made of aluminum-oxide-based powder with a porosity of 60 to 70%. It is shown that LHPs with ammonia exhibit higher performance characteristics than LHPs with acetone and can be used, in particular, in combined cooling systems for mobile radio-electronic equipment in marine, aviation, and aerospace applications.

Published
2002-06-30
How to Cite
Nikolaenko, Y. E., Rassamakin, B. M., & Khairnasov, S. M. (2002). Loop heat pipes with an aluminum evaporator for combined radio-electronic equipment cooling systems. Technology and Design in Electronic Equipment, (3), 22-26. Retrieved from https://tkea.com.ua/index.php/journal/article/view/TKEA2002.3.22
Issue
No. 3 (2002): Tekhnologiya i konstruirovanie v elektronnoi apparature
Section
Articles

Copyright (c) 2002 Nikolaenko Yu. E., Rassamakin B. M., Khairnasov S. M.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.